Premium Stone Design Texture:

More Depth, More Detail, More Extravagance.

Stone finish texture provided so many possibilities, when it come to great looking home. There’s the colour, profile and texture of stone.

Attention to detail focused on doing little things to perfection. Look close & you will see Stone texture offers you the kind of craftsmanship, beauty and reliability that bring big ideas to breathtaking reality.

The quality is too good, after application of stone finish texture looks as “It is real stone”

BALAJI DHOLPUR STONE FINISH TEXTURE

A co-polymer emulsion base special wall texture.

Available in any in-built colour and a variety of designs as per client’s requirement.
Various colour options available

SPECIFICATION

Providing and applying 2-3mm thick ‘Insta Palette’ Dholpur Stone plaster made of co-polymer binders and fine natural marble powders of Earthen as per the required design and pattern (approved by the architect/engineer in charge) on 1 coat of base primer of InstaKrete. Above application to be carried out on the base of single coat / double coat smooth mala plaster.

FORMULATION

Raw Material
Various sized marble powders, co-polymer emulsions, cellulose thickeners, additives, biocides and water.

Process
Water and cellulose thickeners are added in the mixer with additives, following which emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is released through the valve for packaging.

APPLICATION METHODOLOGY

Application Tool : Steel Trowel
Thinner : Water
Mixing Ratio : 1-2 % maximum
Packing : 25 Kg Bag

Coverage :

It may vary with surface condition & application method, film thickness applied

APPLICATION METHODOLOGY
Surface must be cleaned of chalk and debris. A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush. The material is applied using a trowel to get the required design, water can be added in for easier application depending on the requirement. Drying time is usually between 8-24 hours depending on weather conditions.