Insta Stone Spray Bubble Finish Texture applied by Spray Gun with compressor Machine. You can apply any paint on it. It is used for both Interior & Exterior Walls.
A copolymer emulsion base special wall texture.
Available in inbuilt colours also as per the client’s requirements.
Various colour options available
SPECIFICATION
Providing and applying 1.5-2.5mm thick ‘Insta Palette’ Stone Spray finish synthetic plaster made of co-polymer binders and fine natural marble powders of Earthen as per the required design and pattern (approved by the architect/engineer in charge) on 1 coat of base primer of InstaKrete. Above application to be carried out on the base of single coat / double coat smooth mala plaster.
FORMULATION
Raw Material
Various sized marble powders, co-polymer emulsions, cellulose thickeners, additives, biocides and water.
Process
Water and cellulose thickeners are added in the mixer with additives, following which emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is released through the valve for packaging.
APPLICATION METHODOLOGY
- Application Tool: Spray Gun
- Thinner: Water
- Mixing Ratio: 1-2 % maximum
- Packing: 25 Kg Bag
Coverage :
Insta Stone Finish | 110 to 120 Sq.Ft | 25 Kg bag |
It may vary with surface condition & application method, film thickness applied
APPLICATION METHODOLOGY
The surface must be cleaned of chalk and debris.
A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush.
The material is applied using a trowel to get the required design, water can be added in for easier application depending on the requirement.
Drying time is usually between 8-24 hours