Balaji Comb Finish Texture for Internal Walls

Balaji Comb Finish Texture for Internal Walls

 

 

Insta Comb Finish Texture – The use of handheld comb tools to create beautiful freestyle comb Finish awesome texture.

A copolymer emulsion base special wall texture.

Available in any in-built colour and a variety of designs as per client’s requirement.

Various colour options available

SPECIFICATION

Providing and applying 1-1.5mm thick ‘Insta Palette’ Comb Finish plaster made of co-polymer binders and fine natural marble powders of Earthen as per the required design and pattern (approved by the architect/engineer in charge) on 1 coat of base primer of InstaKrete. Above application to be carried out on the base of single coat / double coat smooth mala plaster.

FORMULATION

Raw Material

Various sized marble powders, co-polymer emulsions, cellulose thickeners, additives, biocides and water.

Process

Water and cellulose thickeners are added in the mixer with additives, following which emulsions are added with various size marble powders. The contents are then allowed to mix for a calculated time period per batch size. Biocides are added as part of the process for anti-fungal, anti-algae properties. Quality standards are checked for the batch and material is released through the valve for packaging.

APPLICATION METHODOLOGY

  • Application Tool: Steel Trowel + Steel Comb
  • Thinner: Water
  • Mixing Ratio: 1-2 % maximum
  • Packing:  25 Kg Bag

Coverage :

80 to 85 Sq.ft. 25 Kg bag

It may vary with surface condition & application method, film thickness applied.

APPLICATION METHODOLOGY

The surface must be cleaned of chalk and debris.

A base coat of primer of relevant colour is applied on the plastered surface using a roller or brush.

The material is applied using a trowel to get the required design, water can be added in for easier application depending on the requirement.

Drying time is usually between 8-24 hours depending on weather conditions.

 

Leave a Reply

%d bloggers like this: